The characteristics of Coconut Fiber-Based Composites And Sugar Fiber-Based Composites
DOI:
https://doi.org/10.21063/jtm.2016.v6.i1.24-31Kata Kunci:
composite, coconut fiber, sugar fiber, characteristicAbstrak
Composites made from natural plant fibers that are environmentally friendly is now more attractive, lighter weight, the number of abundant, renewable, competitive prices has encouraged the use of a broad field of engineering, building interiors and clothing. The characteristics of each fiber is highly variable and influenced by the maturity of fiber materials, processing into fiber, perlakauan after so fibers and fiber treatment. Known properties of fiber can help choose the method that is right and good to be applied in the manufacturing process of composite. Pretreatment, composition and matrix settings, select the type of adhesive is a method that is widely used to obtain physical and mechanical properties superior but physical properties and mechanical produced highly variable and not consistent.
Referensi
M. Syakir, “Inovasi Teknologi Mendukung Pengembangan Serat Alam Nasional,”Prosiding Seminar Serat Alam, 8 Juli 2011, hal 1-11
M.A. Faris, S.M. Sapuan, T. Anwer, M.Jawaid and M.E. Hoque, “Natural Fiber Reinforced Conductive Polymer Composites as Functional Materials: A review,”Synthetic Metals 206 (2015), 43-54.
S.M. Sapuan, D.Bachtiar.,Mechanical Properties of Sugar Palm Fiber Reinforced High Impact Polystyrene Composites, SciVerse ScienceDirect-Procedia Chemistry 4 (2012), 101-106.
T. Sucipto, S. RuhendidanA. Santoso, Karakterisasi Partikel dan Likuida Tandan Kosong Sawit, Departemen Kehutanan, 2014.
ufriah, Supriyanto Wagiman, Masrinah.,.Sifat fisik dan Mekanika Papan Partikel dari Batang Sawit dengan variasi Tempratur Kempa Panas, RIMBAKALIMANTAN, Desember 2007. , Vol. 12 No. 2 hal. 106-114.
A. Kasim, Yumarni dan A. Fuadi, “Pengaruh Suhu dan Lama Pengempaan pada Pembuatan Papan Partikel dari Batang Kelapa Sawit dengan Perekat Gambir Terhadap Sifat Papan Partikel,”Jurnal Tropical Wood Science and Technology, 2007, Vol. 5 No.1
T. Y. Ying, L. K. Teong, W. N. W. Abdullah and L. C. Peng, “The Effect of Various Pretreatment Methods on Oil Palm Empty Fruit Bunch and Kenaf Core Fibers For Sugar Production,”Procedia Environmental Sciences20 (2014), 328-335.
B. Subiyanto, Subyakto, Sudijono, M. Gofar, danS. S. Munawar, “Pemanfaatan limbah Tandan Kosong dari Industri Pengolahan Kelapa Sawit untuk Papan Partikel dengan perekat Phenol Formaldehida,”UPT Balai Litbang Biomaterial-LIPI. 2003.
M. A.Binhussain and M. M. El-Tonsy, “Palm Leave and Plastic Waste Wood Composite For out-door Structures,”Construction and Building Materials, 47 (2013), 1431-1435.
Sahwolita, Usiadan I. R. Sari, “Karateristik Papan Com-Ply dari Campuran Kayu Sawit dan Koran Bekas,” Fakultas Pertanian Univ. Sumatera Utara, 2015 hal. 1-18.
I. Mawardi, “Mutu Papan Partikel dari Kayu Kelapa Sawit (KKS) Berbasis Perekat Polystyrene,”Jurnal Teknik Mesin, DOAJ, 2009. 11 (2), 91-96.
N. Srinivasababu, J.S. Kumar and K.V. K. Reddy, “Manufacturing and Characterization of Long Palmyra Palm/Borassus Flabellifer Petiole Fibre Reinforced Polyester Composites,”ScienceDirect-Procedia Technology 14 (2014), 252-259.
O. Anggeraini, D. Setyowatidan Nurhaida, “Kekuatan Papan Partikel dari Sabut Kelapa dan Limbah Plastik Berlapis Bambu dengan variasi Kerapatan dan Lama Perendaman NaOH,” Fak Kehutanan Univ Tanjung Pura, 2014, 408-416.
Bahruddin, A.Ahmad, A. Prayitnodan R. Satoto,“Morphology and Mechanical Properties of Palm Based Fly Ash Reinforced Dynamically Vulcanized Natural Rubber/Polypropylene Blends,”SciVerse ScienceDirect-Procedia Chemistry 4 (2012), 146-153.
N. A. Nordin, F. M. Yussof, S. Kasolang, Z. Sallehdan M. A.Ahmad, “Wear Rate of Natural Fibre: Long Kenaf Composite,”ScienceDirect-Procedia Engineering 68 (2013), 145-151, 2013 Elsevier.
Y.A. El-Shekeil, S.M. Sapuan, M. Jawaid and O.M. Al-Shula’a, “Influence of Fiber Content on Mechanical, Morphological and Thermal Properties of Kenaf Fiber Reinforced Poly(vinyl chloride)/thermoplastic polyurethane polyblend Composite,”Material and Design, vol. 58 (2014) 130-135.
R. C.A. Lumintang, R. Soenokodan S. Wahyudi, “Komposit Hibrid Polyester Berpenguat Serbuk Batang dan Serat Sabut Kelapa,”Jurnal Rekayasa Mesin, vol.2 No.3- 2011, 146-153.
Amin dan Samsudi, “Pemanfaatan Limbah Serat Sabut Kelapa Sebagai Bahan Pembuat Helm Pengendara Kendaraan Roda Dua,”Prosiding seminar Nasional UNIMUS 2010, ISBN.978.979.704.833.9, pp. 314-318.
J.O. Agunsoye, S. I. Talabi, S. O. Samuel, “Study of Mechanical Behaviour of coconut shell Reinforced Polymer Matrix Composite,”Menirals and Materials Characterization& Engineering (JMMC & E), 2012, 11, 774-779.
Fajriyanto dan F. Firdaus, “Panel Dinding Bangunan Ramah Lingkungan dari Komposit Limbah Pabrik Kertas, Sabut kelapa dan Sampah Plastik: Pengaruh Komposisi Bahan dan Beban Pengempaan terhadap kuat Lentur.” Jur. Teknik Mesin UII, ISBN 978-979-3980-15-7, Yogyakarta, 22 Nofember 2008.
Sudarsono, T. Rusdiantodan Y. Suriyadi, “Pembuatan papan partikel berbahan baku sabut kelapa dengan bahan pengikat alami (Lem Kopal),”Jurnal Teknologi, 2010, vol. 3 no. 1 22-32.
B. Maryanti, A. A. Soniefdan S. Wahyudi, “Pengaruh Alkalisasi Komposit Serat Kelapa-Polyester terhadap Kekuatan Tarik,”Jurnal Rekayasa Mesin, Vol.2 No.2 tahun 2011, 123-129 ISSN 0216-468X.
Sudarsono, T. Rusianto dan Yogi Suriadi, “Pembuatan Papan Partikel Berbahan Baku Sabut Kelapa dengan Bahan Pengikat Alami (Lem Kopal),”Jurnal Teknologi, Juni 2010, Vol.3 No.1, 22-32
B. Widodo, “Analisa Sifat Mekanik Komposit Epoksi dengan Penguat Serat Pohon Aren (ijuk) Model Lamina Berorientasi Sudut Acak (Random),”Jurnal Teknologi Technoscientia, 2008, vol 3 no.1 hal 1-5.
J. Liu, C. Jiaand C. He, “Flexural Properties of Rice Straw and Starch Composites,”SciVerseScienceDirect-AASRI Procedia, 2 (2012) 89-94
H. M. Naguib, U. F. Kandil and A. I. Hashem, “Effect of Fiber Loading on the Mechanical and Physical Properties of “Green” Bagasse-Polyester Composite,”Journal of Radition Research and Applied Sciences 8, (2015) 544-548.
D. U. Shah, P. J. Schubel, P. Licence and M. J. Clifford, “Determining the Minimum, Critical an Maximum Fibre Content for Twisted Yarn Reinforced plant fibre Composites,”Composites Science and Technology 72 (2012) 1909-1917.
Unduhan
Diterbitkan
Terbitan
Bagian
Lisensi
Artikel ini berlisensiCreative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
