ANALISA KEKUATAN TARIK HASIL SPOT WELDING BAJA KARBON RENDAH
DOI:
https://doi.org/10.21063/jtm.2012.v1.i2.6-9Kata Kunci:
spot welding, nugget, time pressure, tensile strengthAbstrak
The study aims to analyze the influence of time pressure on the strength of the weld connection point (spot welding) low carbon steel. The study was conducted by analyzing the tensile strength of the weld point by press time variation 20, 25, and 30 seconds on a current strength 70 Amperes. The results show that the press time will determine the outcome of a process of welding and weld strength. The longer of press time will result in nugget diameter (weld metal) getting bigger, and this resulted in attraction strength also increased
Referensi
Haryono Wiryosumarto, Teshi Okumura. 1991. “Teknik Pengelasan Logam”. Cetakan kedelapan. Jakarta : PT Pradnya Paramita.
Tata Surdia, Shinrokku Saito. 1992. “Pengetahuan Bahan Teknik”, Cetakan kedua. Jakarta : PT Pradnya Paramita.
E.P Popov, Zainal Astamar. 1986. “Mekanika Teknik (Mechanic Of Material)”. Cetakan Kedua, Jakarta : Erlangga.
Sriwidharto. 1996. “Petunjuk Kerja Las”, Cetakan Ketiga, Jakarta : PT Pradnya Paramita.
Raldi. 2009. “Analisa Kekuatan Tarik Hasil Las Titik (Spot Welding) Pada Baja Karbon Rendah”.
Unduhan
Diterbitkan
Terbitan
Bagian
Lisensi
Artikel ini berlisensiCreative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
