Manufacturing System Design of a CNC Laser Engraver

Authors

  • Anrinal Institut Teknologi Padang
  • Irfan Mandala Putra Institut Teknologi Padang
  • Risky Oudio Viola Institut Teknologi Padang

DOI:

https://doi.org/10.21063/jtm.2022.v12.i1.32-38

Keywords:

Manufacturing System Design, CNC, Laser Engraver

Abstract

This study aims to design manufacturing system of a CNC Laser Engraver Machine. The design starts from the laser module unit as input at the design stage of the 3-Axis CNC Machine to drive the laser. There are several important components in the production process of the CNC Laser Engraver machine, such as the Box Controller, the Laser Engraver Module unit, the Z-Axis unit, the X-Axis unit, and the Y-Axis unit. Bill of Material (BOM) design is very important to ensure the quantity and specification of materials, and the production of CNC Laser Engraver machines uses various types of production processes and ends with the assembly process. This CNC Laser Engraver machine was completed within 35 working hours, with a cost of Rp. 10,080,000,-.

References

I.S. Harrizal, Syafri dan A. Prayitmo, “Rancang Bangun Sistem Kontrol Mesin CNC Milling 3-Axis Menggunakan Close Loop System,” Jurnal Online Mahasiswa Fakultas Teknik Universitas Riau, vol. 4, no. 2, pp. 1-8, 2017.

K. Wu, C. Krewet and B. Kuhlenkötter, “Dynamic Performance of Industrial Robot in Corner Path with CNC Controller,” Robot. Comput. Integr. Manuf., vol. 54, no. May, pp. 156– 161, 2018, doi: 10.1016/j.rcim.2017.11.008.

G.M. Martinov, A.I. Obuhov, L.I. Martinova and A.S. Grigoriev, “An Approach to Building Specialized CNC Systems for Non-Traditional Processes,” Procedia CIRP, vol. 14, pp. 511–516, 2014, doi: 10.1016/j.procir.2014.03.049.

N.H.B. Ambrizal, A. Farooqi, O.I. Alsultan, and N. Bin Yusoff, “Design and Development of CNC Robotic Machine Integrated with Laser Device,” Procedia Eng., vol. 184, pp. 145–155, 2017, doi: 10.1016/j.proeng.2017.04.079.

L.E. Chiang and J. Ramos, "CNC Control of a Laser Cutting Machine," Proceedings of 1994 IEEE International Symposium on Industrial Electronics (ISIE'94), Santiago, Chile, 1994, pp. 236-241.

A. Stepanov, M. Manninen, I. Pärnänen, M. Hirvimäki, and A. Salminen, “Laser Cutting of Leather: Tool for Industry or Designers?,” Phys. Procedia, vol. 78, no. August, pp. 157–162, 2015, doi: 10.1016/j.phpro.2015.11.028.

I.D. Kurniawan, J.K. Armando, L.I.M.G. Etsa, V.T. Hardianto dan B. Prabandono, “Perancangan Mesin CNC Laser untuk Pengerjaan Pipa Acrylic,” in Industrial and Mechanical Design Conference (IMDeC), Politeknik ATMI Surabaya, vol. 2, 2020, pp. 34-43.

Suharto, P. Fahlevi, A.W. Pratomo dan Paryono,”Prototipe Mesin CNC Dioda Laser Cutting 5500 mW untuk Pembuatan Produk Kreatif Bahan Akrilic,” Politeknologi, vol. 19, no. 2, 2020.

A. Wanggara, Andree, Moris, P.G. Simatupang dan F. Azmi, ”Design of CNC Engraving 3 Axis Machine Based on Arduino Using GRBL Software,” JESCE, vol. 4, no. 1, 2020, pp. 11-17.

I. Malik, S. Effendi dan S. Witjahjo, “ Rancang Bangun Mesin CNC Engraver Mini sebagai Alat Bantu Pembelajaran, “ Teknika, vol. 13, no. 1, 2020, pp. 11-17.

A. Yanto, Anrinal dan I.M. Putra, “Desain dan Analisis Struktur Mesin CNC Laser Engraver,” JTM, vol. 11, no.2, oktober 2021, pp. 107-116.

Downloads

Published

2022-04-30

How to Cite

Anrinal, Putra, I. M., & Viola, R. O. (2022). Manufacturing System Design of a CNC Laser Engraver. Jurnal Teknik Mesin, 12(1), 32–38. https://doi.org/10.21063/jtm.2022.v12.i1.32-38