The Effect of Laser Setting on Engraving Results of A CNC Laser Engraver Machine
DOI:
https://doi.org/10.21063/jtm.2023.v13.i2.37-41Keywords:
CNC Laser Engraver, plywood media, laser power (S-Max) scale, laser head positionAbstract
This research aims to determine the effect of laser settings on the engraving results of a CNC Laser Engraving machine on plywood media. Controlling the movement of the CNC laser machine spindle using Arduino UNO. Testing was carried out by setting the laser power (S-Max) scales are 100, 200, 300, 400, 500 and 600. Position variations of laser head above the plywood media are 3 cm, 5 cm and 7 cm. The test results show that low S-Max scale will produce unclear dotted lines if graving the circle shape and the greater S-Max scale, the thicker the line will be. The lower position of the laser head above the surface of the plywood media, the wider the graving size (engraving line width). The best engraving results were obtained with S-Max scale is 400 and position of laser head above the plywood media is 5 cm with fairly stable and clear engraving lines.
References
I.S. Harrizal, Syafri dan A. Prayitmo, “Rancang Bangun Sistem Kontrol Mesin CNC Milling 3-Axis Menggunakan Close Loop System,” Jurnal Online Mahasiswa Fakultas Teknik Universitas Riau, vol. 4, no. 2, pp. 1-8, 2017.
K. Wu, C. Krewet and B. Kuhlenkötter, “Dynamic Performance of Industrial Robot in Corner Path with CNC Controller,” Robot. Comput. Integr. Manuf., vol. 54, no. May, pp. 156– 161, 2018, doi: 10.1016/j.rcim.2017.11.008.
G. M. Martinov, A. I. Obuhov, L. I. Martinova and A. S. Grigoriev, “An Approach to Building Specialized CNC Systems for Non-Traditional Processes,” Procedia CIRP, vol. 14, pp. 511–516, 2014, doi: 10.1016/j.procir.2014.03.049.
N. H. B. Ambrizal, A. Farooqi, O. I. Alsultan, and N. Bin Yusoff, “Design and Development of CNC Robotic Machine Integrated with Laser Device,” Procedia Eng., vol. 184, pp. 145–155, 2017, doi: 10.1016/j.proeng.2017.04.079.
L. E. Chiang and J. Ramos, "CNC Control of a Laser Cutting Machine," Proceedings of 1994 IEEE International Symposium on Industrial Electronics (ISIE'94), Santiago, Chile, 1994, pp. 236-241.
A. Stepanov, M. Manninen, I. Pärnänen, M. Hirvimäki, and A. Salminen, “Laser Cutting of Leather: Tool for Industry or Designers?” Phys. Procedia, vol. 78, no. August, pp. 157–162, 2015, doi: 10.1016/j.phpro.2015.11.028.
I.D. Kurniawan, J.K. Armando, L.I.M.G. Etsa, V.T. Hardianto dan B. Prabandono, “Perancangan Mesin CNC Laser untuk Pengerjaan Pipa Acrylic,” in Industrial and Mechanical Design Conference (IMDeC), Politeknik ATMI Surabaya, vol. 2, 2020, pp. 34-43.
Suharto, P. Fahlevi, A.W. Pratomo dan Paryono,” Prototipe Mesin CNC Dioda Laser Cutting 5500 mW untuk Pembuatan Produk Kreatif Bahan Akrilic,” Politeknologi, vol. 19, no. 2, 2020.
A. Wanggara, Andree, Moris, P.G. Simatupang dan F. Azmi,” Design of CNC Engraving 3 Axis Machine Based on Arduino Using GRBL Software,” JESCE, vol. 4, no. 1, 2020, pp. 11-17.
I. Malik, S. Effendi dan S. Witjahjo, “Rancang Bangun Mesin CNC Engraver Mini sebagai Alat Bantu Pembelajaran, “Teknika, vol. 13, no. 1, 2020, pp. 11-17.
Shilpa, V. J., & Mahmood, S. H., 2018. Design and implementation of three-axis cost efficient cnc pcb milling machine. 2018 International Conference on Recent Trends in Electrical, Control and Communication (RTECC), pp. 106- 109.
Wibisono, G., Wijanarka, B. S., and Theophile, H., 2020. The Link and Match between the Competency of Vocational High Schools Graduates and the Industry on CAD/CAM and CNC. Jurnal Pendidikan Teknologi dan Kejuruan, Vol. 26 (1) pp. 26-34.
Tung, T. T., Quynh, N. X., and Minh, T. V., 2021. Development and Implementation of a Mini CNC Milling Machine. Acta Marisiensis. Seria Technologica, Vol. 18 (2) pp. 24-28.
Asmara Yanto, Anrinal dan Irfan Mandala Putra, “Desain dan Analisis Struktur Mesin CNC Laser Engraver,” JTM - ITP, vol. 11, no.2, oktober 2021, pp. 107-116.
Anrinal, Asmara Yanto dan Risky Oudio Viola, “Desain sistem manufaktur sebuah Mesin CNC Laser Engraver,” JTM - ITP, vol. 11, no.2, april 2022, pp. 107-116.
Anrinal, Muhammad Fadherizal dan Asmara Yanto “Performance Testing of The CNC Laser Engraver Machine on plywood Media,” JTM - ITP, vol. 13, no.1, April 2023, pp. 1-5.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Anrinal Anrinal, Farza Anugrah Pratama, Asmara Yanto

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.