The Effect of Firmware Settings on Engraving Results of a CNC Laser Engraver Machine
DOI:
https://doi.org/10.21063/jtm.2024.v14.i1.21-26Keywords:
CNC, Laser, Engraving, firmwareAbstract
This study aims to determine the effect of setting the firmware on the time and results of the engraving and to analyze the impact of the engraver variable on the CNC Laser Engraving machine. The test results of the cnc laser engraving firmware setting were obtained from several stages of testing the predetermined settings such as the Axis maximum rate and Axis acceleration settings, in order to find the appropriate Axis maximum rate and Axis acceleration settings for the laser engraving process. Tests with the Axis maximum rate setting are carried out with variables 600 mm/min,1200 mm/min,1800 mm/min aiming to find the ideal speed, Tests with Axis acceleration settings are carried out with variables 20 mm/s2, 40 mm/s2, 60mm/s2. aims to find the ideal acceleration by looking at the stability of the results and comparing the test data. axis maximum rate ($110 and $111) 600 mm/min and axis acceleration ($120 and $121) 40 mm/s2, taking into account the engraving time and the resulting clean, non-blur engraving results and the resulting engraving line width. Based on the study, it is recommended for users to be careful in setting the firmware for maximum and clean results. Based on the speed and acceleration test data on the engraving scale, the faster the engraving process, the smaller and blurry the resulting scale (width of the engraving) will be.
References
I.S. Harrizal, Syafri dan A. Prayitmo, “Rancang Bangun Sistem Kontrol Mesin CNC Milling 3-Axis Menggunakan Close Loop System,” Jurnal Online Mahasiswa Fakultas Teknik Universitas Riau, vol. 4, no. 2, pp. 1-8, 2017.
K. Wu, C. Krewet and B. Kuhlenkötter, “Dynamic Performance of Industrial Robot in Corner Path with CNC Controller,” Robot. Comput. Integr. Manuf., vol. 54, no. May, pp. 156– 161, 2018, doi: 10.1016/j.rcim.2017.11.008.
G. M. Martinov, A. I. Obuhov, L. I. Martinova and A. S. Grigoriev, “An Approach to Building Specialized CNC Systems for Non-Traditional Processes,” Procedia CIRP, vol. 14, pp. 511–516, 2014, doi: 10.1016/j.procir.2014.03.049.
N. H. B. Ambrizal, A. Farooqi, O. I. Alsultan, and N. Bin Yusoff, “Design and Development of CNC Robotic Machine Integrated with Laser Device,” Procedia Eng., vol. 184, pp. 145–155, 2017, doi: 10.1016/j.proeng.2017.04.079.
L. E. Chiang and J. Ramos, "CNC Control of a Laser Cutting Machine," Proceedings of 1994 IEEE International Symposium on Industrial Electronics (ISIE'94), Santiago, Chile, 1994, pp. 236-241.
A. Stepanov, M. Manninen, I. Pärnänen, M. Hirvimäki, and A. Salminen, “Laser Cutting of Leather: Tool for Industry or Designers?,” Phys. Procedia, vol. 78, no. August, pp. 157–162, 2015, doi: 10.1016/j.phpro.2015.11.028.
I.D. Kurniawan, J.K. Armando, L.I.M.G. Etsa, V.T. Hardianto dan B. Prabandono, “Perancangan Mesin CNC Laser untuk Pengerjaan Pipa Acrylic,” in Industrial and Mechanical Design Conference (IMDeC), Politeknik ATMI Surabaya, vol. 2, 2020, pp. 34-43.
Suharto, P. Fahlevi, A.W. Pratomo dan Paryono,”Prototipe Mesin CNC Dioda Laser Cutting 5500 mW untuk Pembuatan Produk Kreatif Bahan Akrilic,” Politeknologi, vol. 19, no. 2, 2020.
A. Wanggara, Andree, Moris, P.G. Simatupang dan F. Azmi, ”Design of CNC Engraving 3 Axis Machine Based on Arduino Using GRBL Software,” JESCE, vol. 4, no. 1, 2020, pp. 11-17.
I. Malik, S. Effendi dan S. Witjahjo, “ Rancang Bamgun Mesin CNC Engraver Mini sebagai Alat Bantu Pembelajaran, “ Teknika, vol. 13, no. 1, 2020, pp. 11-17.
V. J. Shilpa & S.H. Mahmood, 2018. Design and implementation of three-axis cost efficient cnc pcb milling machine. 2018 International Conference on Recent Trends in Electrical, Control and Communication (RTECC), pp. 106- 109.
G. Wibisono, B.S. Wijanarka and H. Theophile, 2020. The Link and Match between the Competency of Vocational High Schools Graduates and the Industry on CAD/CAM and CNC. Jurnal Pendidikan Teknologi dan Kejuruan, Vol. 26 (1) pp. 26-34.
A. Yanto, A. Anrinal dan I.M. Putra, “Desain dan Analisis Struktur Mesin CNC Laser Engraver,” JTM - ITP, vol. 11, no.2, oktober 2021, pp. 107-116.
A. Anrinal, A. Yanto dan R.O. Viola, “Desain sistem manufaktur sebuah Mesin CNC Laser Engraver,” JTM - ITP, vol. 11, no.2, april 2022, pp. 107-116.
A. Anrinal, M. Fadherizal dan A. Yanto “Performance Testing of The CNC Laser Engraver Machine on plywood Media,” JTM - ITP, vol. 13, no.1, april 2023, pp. 1-5.
A. Anrinal, F.A. Pratama dan A. Yanto “The Effect of Laser Setting on Engraving Results of a CNC Laser Engraver Machine,” JTM - ITP, vol. 13, no.2, october 2023, pp. 37-41.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Anrinal Anrinal, Muhammad Apri Zamhari, Asmara Yanto
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
